3
A. 13.66 in. B. 8.65 in. C. 6.74 in. D. 5.12 in.
DIMENSION REFERENCE
MOUNTING OPTIONS
Downrod MountAngled Ceiling Mount (Up to 16 degrees)
Two Mounting Options
Choose one of the following mounting options:
Downrod Mount is best suited for ceilings 8 ft. or higher. For taller ceilings you may want to use a longer
downrod (not included).
Angled Ceiling Mount is best suited for angled or vaulted ceilings. A longer downrod is sometimes necessary
to ensure proper blade clearance from the ceiling. If using the angle mount, check to ensure the ceiling angle is
not steeper than 16°.
To Next Page
Loading...
