Intertek Logwood 2469E - Tools and Materials Needed; Prohibited Burning Materials

-3-
FLOOR PROTECTOR
9.68
30.50
39.35
31.58
5.92
16.33
24.17
DO NOT BURN:
1. Residential or commercial garbage;
2. Lawn clippings or yard waste;
3. Materials containing rubber, including tires;
4. Materials containing plastic;
5. Waste petroleum products, paints or paint thinners, or asphalt products;
6. Materials containing asbestos;
7. Construction or demolition debris;
8. Paper products, cardboard, plywood, or particleboard. The prohibition against burning these materials
does not prohibit the use of re starters made from paper, cardboard, saw dust, wax and similar
substances for the purpose of starting a re in unaffected wood heater.
9. Railroad ties or pressure-treated wood;
10. Manure or animal remains;
11. Salt water driftwood or other previously salt water saturated materials;
12. Unseasoned wood;
13. Any materials that are not included in the warranty and owner’s manual for the subject wood heater; or
14. Any materials that were not included in the certication tests for the subject wood heater.
Tools and Materials Needed
TOOLS
• Pencil
• 6 Foot Folding Ruler or Tape Measure
• Tin Snips
• Drill, Hand or Electric
• Drill Bit 1/8" Dia. (For Sheet Metal Screws)
• Adjustable Wrench
• Screw Driver (Blade-Type)
• Gloves
• Safety Glasses
MATERIALS
• 6" Elbow, Collar and Thimble; As Required (24 gauge
min.)
• 1/2" Sheet Metal Screws (No. 10A x 1/2")
• 6" Diameter, 24 gauge, black or blued steel
• Underwriters Laboratories (UL, ULC) Listed
• Residential Type HT (2100°F) Chimney or use a
• Masonry Chimney in good repair.
• Floor Protector Material (R value = 2.06); Size and
Installation as specied in this manual
• Furnace Cement (Manufacturer Recommends:
• Rutland Black Code 78 or Equivalent)
• Optional; 6" Barometric Draft Regulator (DR-6)
HEATER DIMENSIONS
FIG. 1