EasyManuals Logo
Home>Intex>Swimming Pool>126368NP

Intex 126368NP User Manual

Intex 126368NP
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
345
A
SAVE THESE INSTRUCTIONS
(345IO) SAND FILTER PUMP COMBO ENGLISH 7.5” X 10.3” PANTONE 295U 04/10/2022
English
Page 28
TITANIUM AND E.C.O. ELECTRODES CLEANING
The titanium electrode and E.C.O. electrodes have
a self cleaning function incorporated into the
electronic control’s programming. In most cases this self cleaning action will keep the electrodes
working at optimum efficiency. If the pool water is hard (high mineral content) the electrodes may
require periodic manual cleaning. To maintain maximum performance, we recommend that you
open and visually inspect the titanium and E.C.O. electrodes
(48 & 49)
monthly.
The following steps are some instructions on how to clean your cell.
1.
Switch off the unit and unplug the power cord from the electrical socket.
2.
Disconnect the hose
(12)
from the cell housing
(46)
outlet
(see drawing 38)
.
3.
Unscrew the titanium electrode plug collar and cell collar, disconnect the plug from
the titanium electrode
(48)
and remove the titanium electrode from the cell housing
(see
drawing 39)
.
4.
Place the titanium electrode in a container and pour kitchen grade vinegar into the container
until the titanium electrode is immersed
(see drawing 40)
. Soak for 1 hour and then flush
with a high-pressure garden hose.
5.
Unscrew the E.C.O. electrode plug collar and cell collar, disconnect the plug from the E.C.O.
electrode
(49)
and remove the E.C.O. electrode from the cell housing
(see drawing 41)
.
6.
Place the E.C.O. electrode in a container and pour kitchen grade vinegar into the container
until the E.C.O. electrode is immersed
(see drawing 42)
. Soak for 1 hour and then flush with
a high-pressure garden hose.
7.
Disconnect the interconnecting hose
(13)
from the cell housing inlet
(see drawings 37 & 43)
.
8.
Remove the cell housing from the tank base
(see drawing 44)
.
9.
Flush with a high-pressure garden hose if there is any sediments in the cell housing.
10.
Reverse steps 2 to 9 to reconnect everything back.
38
37
40
12
39
42
43
41
44
46
13

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intex 126368NP and is the answer not in the manual?

Intex 126368NP Specifications

General IconGeneral
BrandIntex
Model126368NP
CategorySwimming Pool
LanguageEnglish

Related product manuals