120
A
SAVE THESE INSTRUCTIONS
(120IO) GRAPHITE GRAY PANEL™ POOL ENGLISH 7.5” X 10.3” PANTONE 295U 04/20/2022
English
Page 9
• Use a large mason rule (aluminum or wood)
and a level. Level out the ground by cutting
rectangles (or squares), locating this rule in
the selected and cleaned area (see
drawing 2.2).
4. Finishing
• On the cleaned and leveled ground, spread a light coat of sieved dirt to a maximum depth of 1/2 inch
(1cm). Spray water and compact it (with a garden roller). Double check and ensure it is well leveled.
The ground has to be perfectly level in order to proceed further.
5. Patio block installation
• Purchase 13 pieces of patio block for 13’8” pool or 15 pieces of patio block for 15’8” pool. The minimum
dimensions of each block should be 18” x 18” x 2”. Mark the area where the blocks will be buried (see
drawing 3.1), then remove 2” (5.08cm) of soil from the marked area (see drawing 3.2).
• For 13’8” (417cm) pool, where
A = 7’3” (221cm) = Radius of grass area need to be removed and leveled.
B = 3’5” (104.1cm) = Distance between each Patio Block.
For 15’8” (478cm) pool, where
A = 8’3” (251.5cm) = Radius of grass area need to be removed and leveled.
B = 3’5” (104.1cm) = Distance between each Patio Block.
• The top of blocks should be flush with soil surface and level with the area surface and with all patio
blocks around entire pool (see drawing 3.3).
POOL SETUP
(
continued
)
2.2
A
B
3.1
3.2
18” (45.7cm)
18” (45.7cm)
2” (5.08cm)
3.3
To Next Page
Loading...
Need help?
General
