117A
SAVE THESE INSTRUCTIONS
English
(117IO) CLEARVIEW PRISM FRAME™ PREMIUM POOL ENGLISH 7.5” X 10.3” PANTONE 295U 12/14/2020
Page 8
POOL SETUP (continued)
• Use a large mason rule (aluminum or wood)
and a level. Level out the ground by cutting
rectangles (or squares), locating this rule in
the selected and cleaned area
(see drawing 2.2).
4. Finishing
• On the cleaned and leveled ground, spread a light coat of sieved dirt to a maximum depth of 1/2 inch
(1 cm). Spray water and compact it (with a garden roller). Double check and ensure it is well leveled.
The ground has to be perfectly level in order to proceed further.
5. Patio block installation
•
Purchase 16 pieces of patio block for 16’ pool. The minimum dimensions of each block should be
18” x 18” x 2”. Mark the area where the blocks will be buried
(see drawing 3.1)
, then remove 2” (5.08 cm)
of soil from the marked area (see drawing 3.2).
For 16’ (488 cm) pool, where
A = 8’9” (266.7 cm) = Radius of grass area need to be removed and leveled.
B = 3’5” (104.1 cm) = Distance between each Patio Block.
• The top of blocks should be flush with soil surface and level with the area surface and with all patio
blocks around entire pool
(see drawing 3.3).
2.2
A
B
3.1
3.2
18” (45.7 cm)
18” (45.7 cm)
2” (5.08 cm)
3.3
To Next Page
Loading...
Need help?
General
