Intex ECO5110 User Manual

(329PO) MODEL ECO5110&6110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 01/22/2021
329
PO
SAVE THESE INSTRUCTIONS
English
Page 7
SETUP INSTRUCTIONS (continued)
1
. Go directly to step 2 if your pool is empty. If your above-ground-pool is filled with water,
unscrew the strainer grids from the strainer connectors and insert the black hat-like plugs
into the connectors, before installing the saltwater pool system.
2
. Connect the adaptor A
(1)
to the electrolytic cell
(3)
outlet as shown in Drawing #1. Tighten
securely.
3
. Disconnect the water return hose from the filter pump connection and connect it to the
adaptor A
(1)
on the Saltwater System with a hose clamp. (see Drawing #1)
4
. Connect adaptor B
(8)
to the connector hose
(7)
. Tighten securely. (see Drawing #1)
5
. Connect adaptor B
(8)
to filter pump outlet (lower connection). Tighten securely.
6
. Remove the black hat-like plugs that prevent water from flowing out of the pool. Now, return
the strainer grids to the strainer connectors.
1
3
7
8
7
8
Filter
Pump

Intex ECO5110 Specifications

General

Brand	Intex
Model	ECO5110
Category	Water System
Language	English