345
A
SAVE THESE INSTRUCTIONS
(345IO) SAND FILTER PUMP COMBO ENGLISH 7.5” X 10.3” PANTONE 295U 04/10/2022
English
Page 29
MAINTENANCE (continued)
The Test Strips can test the ʺFree Chlorineʺ, ʺpHʺ, ʺCalcium Hardnessʺ and ʺTotal Alkalinityʺ
levels at the same time. We recommend that you test the water chemistry weekly, and maintain
the chlorine concentration at 0.5-3 ppm.
Directions and Use
1.
Dip the entire strip into the water and remove immediately.
2.
Hold the strip level for 15 seconds. Do not shake excess water from the strip.
3.
Now compare the strip pad to the color chart on the packaging label. If necessary, adjust the
chemical level in the pool water. It is very important, to use the proper technique when
testing the water's chemical level. Read and follow the written strip instructions carefully.
INTEX
®
TEST STRIPS
(
PACKED WITH THE PRODUCT
)
To Next Page
Loading...
Need help?
General
