Why does my Intex Swimming Pool have algae?
Algae growth in your Intex Swimming Pool may be due to incorrect chlorine and pH levels. To fix this, super chlorinate with shock treatment and adjust the pH to the level recommended by your pool store. Vacuum the pool bottom and maintain the correct chlorine level.
What to do if my Intex 26363EH Swimming Pool water is colored?
Colored water in your Intex Swimming Pool is likely caused by copper, iron, or manganese in the water being oxidized by the chlorine. Adjust the pH to the recommended level, run the filter until the water clears, and replace the filter cartridge frequently.
How to clean sediment on the bottom of my Intex 26363EH Swimming Pool?
Sediment on the bottom of your Intex Swimming Pool is likely due to heavy use. Use an Intex pool vacuum to clean the pool bottom.
How to remove surface debris from my Intex Swimming Pool?
Surface debris in your Intex Swimming Pool may be caused by the pool being too close to trees. Use an Intex pool skimmer to remove it.
What to do if there is floating matter in my Intex 26363EH water?
Floating matter in your Intex Swimming Pool could be due to hard water caused by a high pH level, low chlorine content, or foreign matter in the water. Correct the pH level (check with your pool dealer for advice), ensure the chlorine level is correct, and clean or replace the filter cartridge.
How to fix chronic low water level in Intex 26363EH Swimming Pool?
A chronic low water level in your Intex Swimming Pool may be caused by a rip or hole in the pool liner or hoses. Repair it with a patch kit, finger-tighten all caps, and replace the hoses.
What to do if Intex Swimming Pool inlet air adaptor is leaking?
If the inlet air adapter of your Intex Swimming Pool is leaking, the hose clamps may not be well-fitted. Tighten or reinstall the hose clamps.
What to do if Intex Swimming Pool inlet treaded air connector is leaking?
If the inlet treaded air connector of your Intex Swimming Pool is leaking, the plunger valve may not be well-fitted. Tighten or reinstall the plunger valve.
What to do if air jet valve is leaking in my Intex Swimming Pool?
If the air jet valve in your Intex Swimming Pool is leaking, ensure the valve is tight and facing up. If it continues, turn the pump ON for a few seconds, then turn it OFF, repeat 3 times. If the problem persists, remove the air jet valve, flush out any dirt with water, and replace the valve. If the valve is broken, replace it with a new one.
Ensures child safety and prevents drowning through supervision and proper pool access control.
Addresses electrical and suction hazards, and outlines emergency preparedness measures.
Details the mandatory requirements for pool barriers to prevent unauthorized access.
Provides guidelines for selecting and preparing the installation site for the pool.
Step-by-step instructions for the physical assembly of the pool structure and components.
Covers posting safety signs and establishing essential pool usage rules for all users.
Instructions for safely draining the pool and preparing it for long-term storage.
General| Brand | Intex |
|---|---|
| Model | 26363EH |
| Category | Swimming Pool |
| Language | English |
To Next Page