To Next Page
R
Richard OsborneSep 23, 2025
What does E92 mean on my Intex Swimming Pool?
- Mmisty96Sep 23, 2025
The E92 error code indicates a high salt level. Partially drain the pool and refill it with fresh water.
What does E92 mean on my Intex Swimming Pool?
The E92 error code indicates a high salt level. Partially drain the pool and refill it with fresh water.
Why is the water in my Intex PureSpa SJB-HS-20 not clean?
If the water isn't clean, ensure the cartridge assembly is properly attached. Increase filtration time if it's insufficient. Clean or replace the filter cartridge. Maintain proper water sanitation by following the chemical manufacturer’s instructions. Check and clean the filtration inlet and outlet regularly, as they may be clogged.
What to do if my Intex PureSpa SJB-HS-20 tub loses air pressure?
If the tub loses air pressure, ensure the air valve cap is securely closed. If the air valve base is loose, fill the spa tub with air and tighten the air valve base. If there is a hole, cut, or split on the spa tub, apply liquid soap and water to find the leak, then clean and dry the area before applying the repair patch.
How to solve leaking between spa tub and control unit connectors on my Intex Swimming Pool?
If there's leaking between the spa tub and control unit connectors, tighten the inlet and outlet connections. Also, check if the spa control base inlet/outlet o-ring is missing or dirty; coat the o-ring with petroleum jelly for a waterproof seal.
Why is there no display or why doesn't the Intex PureSpa SJB-HS-20 Swimming Pool control unit work?
If there is no display or the spa control unit isn't working, it could be due to several reasons. First, ensure the spa is plugged in and switched on. Next, check that the control panel cable plug is firmly attached to the control base receptacle. Also, verify the power source and reset the RCD if it has tripped. If the RCD is broken, contact Intex Service Center.
What does END mean on my Intex PureSpa SJB-HS-20 Swimming Pool?
After 72 hours of operation, the pump will hibernate, and the rapid heating and water filtration functions are disabled. Press the button to reactivate the filter pump.
What to do if the Intex Swimming Pool jet air control knob isn't working?
If the jet air control knob isn't working, it could be due to clogged or dirty jet nozzles, so clean any dirt inside them. Also, ensure the jet air hose in the control panel is not damaged and securely attached; replace if needed. If the jet airflow plumbing inside the spa tub is damaged, contact Intex Service Center.
What to do if the Intex PureSpa SJB-HS-20 bubble air blower does not work?
If the bubble air blower isn't working, the air blower pump may be too hot. Turn off and unplug the spa, let it cool down, and then restart.
How to fix weak jets output in my Intex PureSpa SJB-HS-20?
Weak jet output can be due to several reasons. Ensure the water level is between the MIN and MAX levels. Check for any obstruction in the suction inlet inside the tub. Also, clean any dirt inside the jet nozzles. If the jet nozzle plumbing pipes are damaged, contact Intex Service Center.
What does E95 mean on my Intex Swimming Pool?
The E95 error code means that the water temperature is around 50°C (122°F). Turn off and unplug the control unit. When the water has cooled down, plug the RCD and restart. You can also turn the heater off, then press the filter and jet buttons to lower the water temperature. If the problem persists, contact Intex Service Center.
Critical safety warnings regarding drowning and electric shock risks.
General safety warnings for spa operation, electrical safety, and usage guidelines.
Precautions regarding water chemistry maintenance and chemical handling.
Key technical details and dimensions of the spa, including capacity and power.
Requirements for choosing a suitable installation location, indoor and outdoor.
Steps for inflating the tub and cover, and installing the control unit.
Procedures for deflating the spa tub, cover, and control unit.
Recommended salt type, optimum levels, and adding/removing salt procedures.
Explanation of control panel buttons, LED display, and features like heating and jets.
Detailed steps for activating, setting, and managing the spa's sanitation system.
Procedures for maintaining clean, sanitized spa water and optimal chemical balance.
How to adjust spa water chemistry levels like pH, alkalinity, and hardness.
Daily inspection, cleaning, and replacement of filter cartridges, and spa water changes.
Instructions for cleaning the electrolytic cell and using test strips for water quality.
Procedures for draining, cleaning, air valve fastening, cover care, and air bladder repair.
General| Brand | Intex |
|---|---|
| Model | SJB-HS-20 |
| Type | Inflatable Hot Tub |
| Air Bubble Jets | 120 |
| Heater | Yes |
| Material | Fiber-Tech Construction |
| Inner Diameter | 150 cm |
| Outer Diameter | 201 cm |
| Height | 71 cm |
| Included Accessories | Cover, Pump, Heater |
