To Next PageTo Next PageWhat to do if the bubble air blower does not work in Intex PureSpa Greywood Deluxe SB-HW20 Hot Tub?
If the air blower pump in your Intex Hot Tub isn't working, it might be too hot. Turn off and unplug the spa, allow it to cool down completely, and then restart it.
How to fix pump connectors that are not level with the spa connectors on my Intex Hot Tub?
If the pump connectors on your Intex Hot Tub aren't level with the spa connectors, elevate the pump using wood or another type of insulated material. This will help align the pump's connectors with those of the spa.
General| Model | SB-HW20 |
|---|---|
| Type | Inflatable Hot Tub |
| Category | Hot Tub |
| Seating Capacity | 4-6 people |
| Inner Diameter | 65 inches |
| Outer Diameter | 77 inches |
| Height | 28 inches |
| Dimensions | 77 x 77 x 28 inches |
| Temperature Range | 68-104°F |
| Massage Air Blower | Yes |
| Voltage | 110-120V |
| Material | 3-Ply laminated PVC |
| Heating Power | 1300 watts |
| Power Consumption | 1, 500 watts |
| Included Accessories | Cover, filter cartridges |
Critical safety warnings for immediate hazards.
Important safety precautions and potential risks.
Guidelines for supervising non-swimmers in the spa.
Recommendations for safety covers and access prevention.
Essential safety equipment and guidelines for safe spa operation.
Essential site preparation steps and requirements for spa installation.
Specific guidelines for setting up the spa indoors.
Specific guidelines for setting up the spa outdoors.
Steps for charging and installing the spa control panel.
Information on connecting an equipotential bonding system for safety.
Instructions for inflating the air bladder of the spa cover.
Detailed steps for installing the spa control unit.
Information regarding the spa cover and its usage.
Overview and functions of the spa control panel interface.
Explains the heat button and heater start timer functions.
Details the heater duration timer and adjustment buttons.
Provides examples of heater operation settings.
Tips to reduce heat loss and energy consumption for efficient spa use.
Procedures for maintaining clean and sanitized spa water and filters.
Recommended levels for pH, alkalinity, and chlorine.
Guidance on adjusting water chemistry levels.
Step-by-step instructions for draining and cleaning the spa tub.
How to tighten and maintain the spa tub air valve.
Solutions for issues with the spa control unit display or power.
Troubleshooting steps for heating issues and tripped circuit breakers.
Diagnosing and fixing issues with the air blower and filtration pump.
Steps to address water cleanliness and air leaks in the spa tub.
Step-by-step guide for disassembling the filter pump motor.
