EasyManuals Logo

Intex SimpleSpa SB-B20 User Manual

Intex SimpleSpa SB-B20
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
348
A
S AVE THESE INSTRUCTIONS
(348IO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 10/09/2019
English
Page 17
MINIMIZE HEAT LOSS AND ENERGY CONSUMPTION ADVICE
1) Always keep the spa cover on to minimize heat loss during heating of the spa between
uses(butnotwhileitisbeingused).Ensurethecoveristtedtightly,aspermanufacturer’s
instructions to maximize insulation. It shall be recommended that the cover, when not in
use, should be kept off the ground to retain its cleanliness (particularly the surface in close
proximity to the water spa water surface). The cover should be stored in an appropriate
location, where it cannot be damaged, or cause damage.
2) Check the set water temperature and consider lowering it for the times when the spa will
typically not be in use.
3) Depending on external conditions, consider turning off the heater entirely if not using the spa
for an extended period of time (where the spa provides this option, but still maintains residual
disinfection/pH-values).
4) Consider that the comfortable temperature range during use may be lower than the maximum
safe temperature.
5) Use the included insulating ground cloth underneath the spa to minimize heat loss through
the bottom of the spa.
6) Maintaincleanlterstopreserveappropriateworkingconditionsforthepumpandavoid
unnecessary water replacement and re-heating.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intex SimpleSpa SB-B20 and is the answer not in the manual?

Intex SimpleSpa SB-B20 Specifications

General IconGeneral
BrandIntex
ModelSimpleSpa SB-B20
CategoryHot Tub
LanguageEnglish

Related product manuals