J
Joseph WilliamsSep 9, 2025
What causes Invacare Indoor Furnishing bed Hi/Lo movement not to stop?
- NNathan RiveraSep 9, 2025
If the bed Hi/Lo movement does not stop, check the cables for damage. If the cables are damaged, call your dealer.
To Next PageTo Next PageWhat causes Invacare Indoor Furnishing bed Hi/Lo movement not to stop?
If the bed Hi/Lo movement does not stop, check the cables for damage. If the cables are damaged, call your dealer.
What to do if the Invacare 5410IVC Medical Equipment bed spring does not stop moving?
If the bed spring on your Invacare Medical Equipment doesn't stop moving, check the pendant for depressed or stuck buttons. If a button is stuck, contact your dealer for repair.
Why Invacare 5410IVC Medical Equipment bed spring does not move?
If the bed spring on your Invacare Medical Equipment isn't moving, it may have reached the end of its stroke. Try operating the opposite button.
What to do if Invacare 5410IVC Medical Equipment Hi/Lo movement does not stop?
If the Hi/Lo movement on your Invacare Medical Equipment bed doesn't stop, check the cables. If they appear damaged, contact your dealer.
What to do if my Invacare 5410IVC bed does not stay in place?
If your Invacare Medical Equipment bed isn't staying in place, make sure the casters are locked.
What to do if Invacare 5410IVC Medical Equipment bed springs do not move?
If the bed springs on your Invacare Medical Equipment aren't moving, check the pull tube(s) for binding. If you notice any binding, contact your dealer for repairs.
What to do if pressing a function on my Invacare Indoor Furnishing pendant results in unintended motion?
If pressing a function on the pendant results in motion other than that intended, the motor cable connections to the junction box might be incorrect. Call your dealer.
What to do if my Invacare Indoor Furnishing bed spring does not move?
If the bed spring does not move, you may have reached the end of the stroke. Try operating the opposite button.
How to fix Invacare Indoor Furnishing bed that does not stay in place?
If the bed does not stay in place, the casters might be unlocked. Make sure to lock the casters.
What to do if Hi/Lo function on my Invacare Full Electric Bed doesn't work?
If the Hi/Lo function isn't working, first ensure the power cord is plugged into a power source. Check that the pendant is correctly connected to the junction box and that the pendant cable isn't entangled or pinched. Also, check the cables for entanglement or pinching. Verify the household fuse/breaker box. If none of these steps work, allow the bed unit to sit for 30 minutes and retry. If the issue persists, it may be due to a broken cable lock or malfunctioning motors, in which case you should call your dealer.
General| Brand | Invacare |
|---|---|
| Model | 5410IVC |
| Category | Medical Equipment |
| Language | English |
