Invacare Softform Active 2 - User Manual

Invacare UKOpera ons Limited
Pencoed Technology Park, Pencoed
Bridgend CF35 5AQ, UK
60132743-A 2022-01-10 1 / 3
Control unit menu display
K J
G
H
I
C D E F
A
B
QuickGuide
Invacare® Softform Active® 2 with RX pump
Pos.
DescriptionFunction
A
Mutebutton
The relevant audible / visible indicator turns on when low pressure,
power failure or alternate failure is recognised. To mute the audible
signal, press the Mute button. The visible indicator will ash u ntil the
problem is solved. If the problem indicated has not been solved within
10 minutes, the indicator will sound again. Press the Mute button to
mute the audible indication, the indicator will not sound again. Refer to
Identifying and repairing faults on page 3 of this guide.
B
Systemincycle/Setupindicator
(OperativeLED)
GreenLEDindicatorasheswhilstsystemissettingup–SolidgreenLED
indicatesnormaloperational.
C
Alternatingsystem/Timingfailure
indicator
RedLEDindicatorashesandaudiblebuzzersoundsifthesystem
recognisesacycletimeproblem.
D
PowerfailureindicatorRedLEDindicatorashesandaudiblebuzzersoundsifthesystemhas
nopowerconnected.Thiscouldbeintheeventofapowerfailure,for
examplecausedbypowercordunpluggedorpoweroffwhencontrol
unitisworking.Whenpowerisrestored,controlunitwillautomatically
startworking.
E
Pressurefailure/Lowpressure
indicator
RedLEDindicatorashesandaudiblebuzzersoundsifthesystem
recognisesalowpressurefailure.
Operation
1. The power indicator will flash and control unit will enter static mode initially until pressure reaches 15 mmHg. Then control
unit will enter alternate mode and power indicator will remain on. The cycle time is set at 10 min, and the pressure is
set at 60 ± 3 mmHg.
Therstinationofnewmattress:theindicatorfunction(visibleandaudibleindicators)willactivateifthemattress
doesnotinatecompletelywithin15minutes.
Operationfailures
• During control unit operation, low pressure indicator will activate within 1 minute if air hoses are disconnected or
air cells are broken.
• In the case of abnormal alternate or no alternate, the audible signal will be activated and alternate failure indicator
will flash.
InvacarePortugal,Lda
RuaEstradaVelha949
4465-784LeçadoBalio
Portugal
Invacare Limited
Pencoed Technology Park, Pencoed
Bridgend CF35 5AQ
UK

Summary

Control Unit Display Overview

Mute Button Functionality

Mute button silences audible alarms for low pressure, power, or alternate failures.

System Status and Failure Indicators

Details Green LED for setup/normal operation and Red LEDs for timing, power, or pressure failures.

System Installation and CPR

Installing the Invacare Softform Active 2

Steps for hanging or placing the control unit and connecting hoses and power.

CPR Procedure Activation

Instructions for activating CPR mode, including deflation time and system reactivation.

Identifying and Repairing Faults

Mattress Inflation and Alternating Failures

Troubleshooting for mattress not inflating or alternating system timing failures.

Power and Pressure Failure Troubleshooting

Solutions for no power indication and pressure/low pressure failures.

Invacare Softform Active 2 Specifications

General

Pump Type	Digital Pump
Cell Cycle Time	10 Minutes
Cover Material	Vapor permeable, stretchable polyurethane
Warranty	2 Years
Mode of Operation	Alternating Pressure