Invacare Softform Premier Active 2S User Manual (English)

Questions and Answers:

J
John JordanAug 2, 2025
What to do if my Invacare Softform Premier Active 2S has no power?
- M
  Megan ReeseAug 2, 2025
  If your Invacare Medical Equipment has no power, first check if the control unit is turned on. If it is off, turn it on. Then, verify that the power cord is properly connected and that the power source is active. If the power source itself has no power, ensure it is turned on. In case of a power outage, wait for the power to be restored. Finally, inspect the fuse; if it's blown, replace it with a spare or identical replacement. If you're unsure how to change a fuse, consult a trained engineer.
J
Joseph CohenAug 13, 2025
Why is the red light flashing on my Invacare Medical Equipment?
- K
  Kara GarciaAug 13, 2025
  If the red light is flashing and there's an audible alert on your Invacare Medical Equipment, it indicates a disconnection. First, ensure the CPR connection hose is properly connected. Also, check that the connector tubes are correctly attached to the air cells in the air insert. Inspect for any kinked or blocked air tubing.
C
cabreralorraineAug 23, 2025
How to fix mattress not inflating on Invacare Medical Equipment?
- L
  Lee PierceAug 23, 2025
  If the mattress of your Invacare Medical Equipment is not inflating or alternating properly, start by checking the CPR hose connection; ensure it is connected and locked in place. If the control unit doesn't turn on despite having power and a good fuse, it should be sent back to Invacare for repair. A major leak in an air cell requires replacing the leaking air cell. Also, inspect the CPR hose or tube connectors for kinks or splits; unkink them or replace any split connectors. For rotor failure or no air due to control unit failure, the control unit needs to be sent back to Invacare for repair.