Do you have a question about the Invacare ScanBed 750 and is the answer not in the manual?
Brand | Invacare |
---|---|
Model | ScanBed 750 |
Category | Medical Equipment |
Language | English |
Provides essential details and warnings for safe operation of the bed.
Explains the Soft Control and HB 70 hand units and their functions.
Describes how to operate the leg section using gas springs or Rastofix.
Explains how to operate and lock the bed's braking castors.
Instructions for operating wooden and steel side rails.
Guide for adjusting the height of the lifting pole handle.
Provides general information, certifications, and safety notes related to the bed.
Steps for receiving the bed, checking for damage, and initial assembly.
Lists and illustrates standard bed parts and optional accessories.
Instructions for emergency release of mattress support parts in case of power failure.
Instructions for mounting mattress retainers and various bed end fittings.
Instructions for mounting and dismounting the steel side rail.
Details on mounting and dismounting BRITT II/III/IV wooden side rails.
Steps for fitting the lifting pole and bumper wheel accessories.
Instructions for mounting the limitation crossbar for specific patient needs.
Guide for operating the built-in mattress support extension.
Detailed steps for disassembling the SB750 bed.
Detailed steps for assembling the SB750 bed.
Illustrates how to route and connect motor wires.
Explains the function and use of the optional ACP box and safety lock.
Lists order numbers for various wooden bed ends and side rails.
Lists order numbers for drip rods, bumper wheels, mattresses, and side rail covers.
Outlines the recommended service intervals and general maintenance procedures.
Describes how motors, hand control, and control units are serviced.
Details on preventive maintenance and testing for the accumulator back-up.
Instructions for replacing accumulator sets and associated safety warnings.
A chart for recording maintenance activities and checks performed on the bed.
A guide to diagnose and resolve electrical system issues.
Identifies lubrication points and recommended lubricants for the bed.
Instructions for cleaning the bed, including specific advice for electrical parts.
Provides detailed dimensions and angles of the bed components.
Details electrical specifications, including voltage, current, load, and protection class.
Lists the weights of various bed components and accessories.
Information on environmentally responsible disposal of the product.