How to fix a stiff castor on Invacare Action 3 Junior Wheelchair?
A stiff or stuck castor on your Invacare Wheelchair is often caused by dirty or faulty bearings. Clean the bearings or replace the castor.
Why does my Invacare Action 3 Junior Wheelchair not travel in a straight line?
If your Invacare Wheelchair isn't moving straight, it could be due to several reasons. One common cause is incorrect tire pressure in one of the rear wheels. Another potential issue is broken or unevenly tightened spokes. Also, check if the castor bearings are dirty or damaged, as this can also cause the problem.
Why is the rolling resistance so high on my Invacare Action 3 Junior?
High rolling resistance in your Invacare Wheelchair is often due to low tire pressure in the rear tires. Ensure that the rear wheels are parallel. If not, adjust them accordingly.
Why does my Invacare Wheelchair tip backwards too easily?
If your Invacare Wheelchair tips backwards too easily, it might be because the rear wheels are mounted too far forward. Another possible cause is that the back angle or seat angle is too large.
Why do the castors wobble when moving fast on my Invacare Action 3 Junior Wheelchair?
Castor wobble on your Invacare Wheelchair when moving fast can be due to too little tension in the castor bearing block or because the castor has worn smooth.
General| Brand | Invacare |
|---|---|
| Model | Action 3 Junior |
| Category | Wheelchair |
| Language | English |
To Next Page
