Invacare Comet Alpine - 8.5 Lordosis Support Adjustment

49
8.5 Adjusting the lordosis supports (Comet
HD
only)
The lordosis support is the outward swell of the backrest which supports the lumbar region of the
spine. You can regulate the strength of the outward swell using an air pump to fit it individually.
Swelling the lordosis support more
• Ensure that the air vent screw (1) is closed fully
clockwise.
• Pump air into the lordosis support using the rubber
ball (2).
The lordosis support will swell outwards more.
Swelling the lordosis support less
• Undo the air vent screw (1) anticlockwise and allow air
to escape out of the lordosis support.
The lordosis support will swell outwards less.