37
Blink
code
Fault Consequence
for the Scooter
Comments
7
Fault in speed
potentiometer
Stops driving
• The drive lever electronics could be
faulty or incorrectly connected. Check the
cabling for open or short-circuited
circuitry.
• Potentiometer is not correctly adjusted.
Put the potentiometer into the centre
position.
8
Motor voltage error Stops driving
• The motor or its cabling is defective
Check the cabling for open or short-
circuited circuitry.
9
Miscellaneous
internal fault
Stops driving
• Contact your Invacare® dealer.
10
Push/freewheel
mode error
Stops driving
• The Scooter has exceeded the
permissible maximum speed during
pushing or freewheeling. Switch the
electronics system off and on again.
To Next Page
Loading...
Need help?
General