TYPICAL PRODUCT PARAMETERS
Lightweight, Standard and Heavy Duty Wheelchairs 12 Part No. 1114811
TYPICAL PRODUCT PARAMETERS
*NOTE: These options are standard for this model.
**NOTE: The seat-to-floor heights are based on urethane tires. If wheelchair is equipped with
pneumatic (properly inflated) or solid rubber tires, add ¼ inch to the measurements listed above.
These heights can vary ±¼ inch due to tire wear and manufacturing tolerances.
***NOTE: Weights based on 18x16 inch wheelchair without front riggings. Weights will vary
depending on how wheelchair is equipped.
LIGHTWEIGHT
OVERALL WIDTH 24½, 26½, and 28½ inches
OVERALL DEPTH
(WITHOUT FRONT RIGGINGS)
31-7/8-inches
SEAT WIDTH 16 or 18 inches and 20 inches
SEAT DEPTH 16 inches
SEAT-TO-FLOOR**
(WITH 24-INCH WHEELS)
ADULT:
HEMI:
19½ inches
17½ inches
BACK STYLE Sectional
BACK HEIGHT 16 or 18 inches
ARM STYLES Fixed Height; Desk or Full Length; Flip Back
FRONT RIGGINGS Swingaway Footrests, Elevating Legrests
REAR AXLE Permanent
REAR WHEELS 24*-inch Composite* Urethane*, Pneumatic or Pneumatic Flat Free Insert
HANDRIMS Composite*, Black Painted Aluminum
WHEEL LOCKS Push to Lock (Adult), Pull to Lock (Hemi)
CASTER SIZE 8x1-inch Solid Rubber* and 8x1¼ inch Pneumatic or Pneumatic Flat Free
Insert
UPHOLSTERY Black Nylon
WEIGHT*** 33¾ pounds
SHIPPING WEIGHT***
(APPROX.) 43½ pounds
WEIGHT LIMIT 250 lbs (114 kg)
STANDARD HEAVY DUTY
OVERALL WIDTH
PERMANENT ARM:
REMOVABLE ARM:
23¼, 25¼, 27¼ inches
24½, 26½, 28½ inches
N/A
28¼, 30¼, 32¼ inches
OVERALL DEPTH
(WITHOUT FRONT RIGGINGS)
31-7/8-inches 33½ inches
SEAT WIDTH 16, 18 and 20 inches 20, 22 and 24 inches
To Next Page
Loading...
