A handy nylon folding strap
makes it easy to fold the chair
after removing the seating
system. Simply pull up on
strap to disengage the folding
crossbrace.
The Transport Ready Option
(TRRO) on the Invacare Spree
XT wheelchair, along with its
KSS seating system, has been
crash tested in accrodance
with ANSI/RESNA WC/19.*
Discrete tilt trigger lockout
levers help prevent anyone
from “accidentally”
disengaging the tilt
mechanisms.
Invacare
®
Quick Set
™
washers
snap onto the frame just
about anywhere you need to
make adjustments –a simple
solution that can reduce your
adjustment time.
Angle-adjustable front head
tubes allow you to realign
the head tubes for maximum
performance when tilt is
changed through the axle
bracket. Head tubes also can
be attached in the leading
position for increased stability.
The durable, adjustable-
angle aluminum foot plate
option utilizes dual-point
attachments and positive lock
mechanisms for dorsi and
planar flexion. Adjustments
can be made while the foot is
on foot plate.
* The TRRO Transport Ready Option on the Spree XT order form includes the Spree XT wheelchair, transport brackets and a wheelchair anchored pelvic belt. The KSS
seating system must also be purchased with this option at an additional charge. No seating system is included in the base price of the wheelchair.
** Invacare has not performed testing using any other seating systems. If seating systems other than the KSS seating system are used, the tie-down brackets are to be used
only to secure an unoccupied wheelchair.
To Next Page
