EasyManua.ls Logo

Invacare STORM Service Manual

Invacare STORM
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
InvacareĀ® STORM
4
SERVICE MANUAL
These instructions contain information about:
Testing work
Repair Instructions
Edition:21.07.09

Table of Contents

Other manuals for Invacare STORM

Question and Answer IconNeed help?

Do you have a question about the Invacare STORM and is the answer not in the manual?

Invacare STORM Specifications

General IconGeneral
ManufacturerInvacare
Maximum Speed6 mph
Weight Capacity300 lbs
Max User Weight300 lbs
Wheel TypePneumatic or Solid
Tire TypePneumatic or Solid
Seat Width16, 18, 20 inches
Seat Depth16 inches
Front Seat Height19 inches

Summary

Safety and Fitting Instructions

Before Any Inspection or Repair Work

Prerequisite checks and manual reviews required before commencing any service or repair.

General Safety Information and Fitting/Removal

Crucial safety precautions for handling components, potential hazards, and proper fitting/removal procedures.

Service Plan (1x Annually)

Operational Faults

Drive Fault Diagnosis

Guides users through diagnosing common drive system faults, their causes, and solutions.

REM Remotes: Error Codes and Diagnostic Codes

Explains error codes and diagnostic information displayed on REM remotes to identify faults.

Diagnosis of Charging Device Faults

Provides troubleshooting steps for issues related to the battery charger and charging process.

Test Procedures

Testing the Motor

Outlines the procedure for testing the motor's resistance to determine its operational status.

Testing the Electro-mechanical Parking Brake

Describes how to test the electro-mechanical parking brake using a multimeter for resistance checks.

Repair Work

Batteries, Cables & Battery Charger

Covers the maintenance and replacement of batteries, checking cables, and handling the battery charger.

Electronics Module

Instructions for replacing electronic modules such as remotes, power modules, actuator modules, and lighting PCBs.

Drive Unit

Covers the replacement of the motor/transmission unit and carbon brushes for the drive system.

Related product manuals