Invacare STORM - Adjusting Seat Tilt Without Tilt Module

74
8.5.2 Adjusting seat tilt without tilt module
CAUTION: Danger of crushing!
• The seat/seat support are very heavy. You should seek help from a second person who can
secure the seat and help when carrying.
Requirements:
• 6 mm Allen key
• Let a 2
nd
person hold on to the seat. Please take into account that the seat is very heavy. Be
sure not to crush your fingers or other parts of the body.
• Loosen and remove the two Allen screws (3) with a 6 mm Allen key.
• Tilt the seat to the desired gradient.
• Place the two parts of the strut on top of each other.
• Refit the Allen screws and tighten them.
• To conclude, check all the mobility aid functions.
•