12
4.2 Electronics modules
A variety of electronics modules can be fitted to the mobility aid.
Before you connect mobility aid components such as adjusting motors/actuators or motors, please
begin by ascertaining which module is installed. Please refer to the following table for an overview.
Electronic module Designation Notes
Power module
ACS II PMA90L
The following remotes can be connected:
- REM 24 SD
- REM A
- REM B
- REM 550
Actuator module
ACT II / ACT IV
The actuator module is optional.
Lighting PCB The lighting PCB is optional.
To Next Page
Loading...
