Why does Invacare TDX SP2 Wheelchair motor make a clicking noise?
If the motor in your Invacare Wheelchair is making a clicking noise, this could be due to: * Defective clutch(es): Replace the clutch. * Defective bearing: Replace the motor. * Defective collector: Measure the internal resistance of the motor, and replace the motor if defective.
Why does Invacare Wheelchair gearbox make a clicking noise?
If the gearbox on your Invacare Wheelchair is making a clicking noise, it could be due to a defective gearbox, which would need replacing. Alternatively, the drive wheel might be loose; tighten the drive wheel and secure the bolts with Loctite if necessary.
Why is there a scraping noise or why is the Invacare TDX SP2 Wheelchair motor blocked?
If you hear a scraping noise or the motor of your Invacare Wheelchair is blocked, this could be caused by: * Defective clutch(es): Replace the clutch. * Defective bearing: Replace the motor. * Defective gearbox: Replace the gearbox.
General| Weight Capacity | 300 lbs |
|---|---|
| Ground Clearance | 2.5" |
| Tires | Pneumatic or solid |
| Seat Width | 16" |
| Seat Depth | 16 - 22" |
| Battery Type | Group 22 |
| Drive Wheels | 14" |
| Weight | 220 lbs |
| Suspension | SureStep Suspension |
| Controller | MK6i |
To Next Page
