Full Length Swing-away & Removable Armrest
(Photograph 6)
The arm rest has a tube which supports the front and back locking devices as well as the armrest pad. This
armrest can be swung towards the back, and can also be removed if required.
Use: To swing away, turn the front lock (A) in order to release. Lift the armrest and position it towards the
back in order to carry out lateral transfers. Carry out these operations in reverse order to replace the
armrest. Turn the front lock (A) in order to firmly secure the armrest to its location.
Removal: Turn the front lock (A) and the back lock
(B) in order to remove the armrest. Lift up the
armrest. Carry out this operation in reverse order to
replace the armrest. Remember that the curved part of
the tube should be facing forward. Turn the front lock
(A) and the lock (B) in order to firmly secure the
armrest to its locations.
Note: The armrest is reversible so that the slot (C)
can be used to hold an NHS tray.
Adjustment: This model does not require any
adjustment.
To Next Page
Loading...
