Assemble
4. Assembling and attaching the grass bag.
a. Slide the plastic proles over the metal frame. Maks sure the proles completely
enclose the frame, lest they slide o during use.
b. Raise up the rear ap.
c. Hang the collection bag on the hooks.
5. Connection to the power supply
Connect the extension cord to the appliance inlet on the switch box.
About 30 cm from the end, creade a loop in the cable. Guide
the loop through the oval hole of the cable strain relief, and
over the hook. Carefully pull it tight.
Connect the plug to the power supply.
WARNING! Check the voltage and current! The voltage
and current must comply with the information on the rating
label. Always use a power supply protected by a residual-
current-operated protective device RCD). If using an extension
cord, ensure it is of the proper size and type for your product
(≥1.5mm2). Use an extension cord specically designed for
outdoor use.
62
To Next Page
