Mulching with the mulch kit (optional)
NOTE: Mulching insert is only available for mower type INV
E1637 P.
When mulching, the grass cuttings are not collected, but are left on the lawn. The
grass mulch prevents the soil from drying out, and supplies it with nutrients.
The best results are obtained by cutting back regularly by about 2cm. Only young
grass with a soft leaf texture decomposes quickly.
Inserting the mulch kit(12)
1. Open the rear ap (3) and hold it in position.
2. Remove the grass bag (9) if necessary
3. Insert the mulch kit (12) into the rear discharge. Ensure the pins under the mulch
kit snap into the respective cut-outs of the deck.
NOTE: If the mulch kit is not properly locked into position, both
the mulch kit and the mower blade may be damaged.
Removing the mulch kit
1. Lift the rear ap
2. Lift the mulch kit to release and remove the mulching kit.
12
3
WARNING! Risk of injury!
Before inserting or removing the mulch kit, switch o the device,
disconnect the power cable and wait until all mowing parts have
come to a standstill.
65
To Next Page
Loading...
