To Next PageTo Next PageTo Previous PageTo Previous Page
What to do if my INVENTOR AR5VI-09WiFi is not working?
If your INVENTOR Air Conditioner isn't working, first, check if the power is turned on and turn it on if it is off. Then, check the fuse and replace it if it's burned out. If you're using the remote control, replace the batteries. Also, the unit’s 3-minute protection may be activated; wait three minutes after restarting the unit. Finally, make sure the timer is turned off.
How to improve heating performance of my INVENTOR AR5VI-09WiFi Air Conditioner?
If your INVENTOR Air Conditioner isn't heating well, it could be due to extremely low outdoor temperatures; in this case, use an auxiliary heating device. Cold air entering through doors and windows can also affect performance; ensure they are closed during use. Another potential cause is low refrigerant due to a leak or long-term use; check for leaks, re-seal if necessary, and top off the refrigerant.
Why does my INVENTOR Air Conditioner start and stop frequently?
Frequent starting and stopping of your INVENTOR Air Conditioner can be due to several reasons. There might be too much or too little refrigerant in the system, so check for leaks and recharge the system. Incompressible gas or moisture may have entered the system, requiring you to evacuate and recharge it with refrigerant. A broken compressor could also be the cause, necessitating a replacement. Lastly, the voltage might be too high or too low; consider installing a manostat to regulate it.
General| Brand | INVENTOR |
|---|---|
| Model | AR5VI-09WiFi |
| Category | Air Conditioner |
| Language | English |
Warnings for safe product operation, covering fire, injury, and environmental hazards.
Information regarding fluorinated greenhouse gases in the air conditioning unit.
Details indicators, symbols, and codes displayed on the indoor unit for operational status.
Specifies the recommended temperature ranges for optimal unit performance and safety.
Covers features like Auto-Restart, Leakage Detection, Wireless Control, and Louver Angle Memory.
Instructions on adjusting vertical and horizontal airflow direction using the remote control.
Explains the energy-saving sleep mode and its temperature adjustment behavior.
Step-by-step guide for cleaning the indoor unit and its air filters, including warnings.
Guidelines for maintaining the unit during long periods of non-use and performing pre-season checks.
Critical safety warnings to observe before attempting any troubleshooting steps.
Lists common operational issues like unit not starting, noises, odors, and mist, with causes.
Lists further common issues like noises, dust, odors, fan failure, and unresponsiveness, with causes.
Addresses poor cooling issues, detailing causes and recommended solutions.
Covers unit not working, frequent stops, poor heating, lamp issues, and error codes with solutions.
