How to fix a noisy and vibrating INVENTOR CLCO290-09BS?
If your INVENTOR Air Conditioner is excessively noisy and vibrates a lot, it could be due to a couple of reasons. First, the ground might not be level, so try placing the unit on a flat, level surface. Second, the air filter might be blocked with dust or debris. In this case, turn off the unit and clean the filter according to the instructions.
Why is my INVENTOR CLCO290-09BS Air Conditioner not cooling well?
There could be several reasons why your INVENTOR Air Conditioner isn't cooling effectively. Check these: * The air filter might be clogged with dust. Turn off the unit and clean the filter according to the instructions. * The exhaust pipe might be disconnected or blocked. Turn off the unit, disconnect the hose, check for blockages, and reconnect it. * The unit might be low on refrigerant, in which case, you should call a service technician to inspect the unit and top off the refrigerant. * The temperature setting might be too high. Try lowering it. * Windows and doors might be open. Ensure they are closed. * The room area might be too large for the unit's capacity. Double-check the cooling area specifications. * There might be heat sources in the room. Remove them if possibl...
General| Energy Class Cooling | A++ |
|---|---|
| Energy Class Heating | A+ |
| SEER | 6.1 |
| SCOP | 4.0 |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
To Next Page