EN
19
|Design and Compliance Notes
Design Notice:
The design and the specications of this unit are subject to change at any given moment, without
prior notice, for the improvement of the product. Always consult with the after sales department or
the manufacturer for further details. Manuals are also subject to updates and you should always
check for the latest version by visiting the manufacturer’s website.
Energy Rating Information
The energy rating of this unit is based on typical installation with the use of the provided, and not
extended, exhaust pipe, without the use of the window slider adaptor or the wall exhaust adaptor
A (as shown in the Installation section of this manual) The unit should be operating under COOL
mode and HIGH fan speed set by the remote controller.
Unit Temperature Range
Mode Temperature Range
Cool 17-35°C (62-95°F)
Dry 13-35°C (55-95°F)
NOTE: To be in compliance EN 61000-3-11, the product CLCO290-09 / CLCO290-09BS shall be
connected only to a supply of the system impedance: | Zsys|=0.437 ohms or less, Before connect
the product to public power network, please consult your local power supply authority to ensure
the power network meet above requirement.
To Next Page
Loading...
Need help?
General
