22
MODE
FAN
TEMP
LED
FOLLOW ME
TURB O SELF CLEAN
ON/OF F
SHOR T
CUT
TIMER
ON
TIMER
OFF
3
1
2
MODE
FAN
TEMP
LED
FOLLOW ME
TURB O SELF CLEAN
ON/OF F
SHOR T
CUT
TIMER
ON
TIMER
OFF
3
1
2
Auto operation
1. Press the MODE
2. Press the UP/DOWN
range of 17°C~ 30°C in 1 °C increments.
3. Press the ON/OFF
NOTE
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, and Heating by
sensing the dierence between the actual ambient
room temperature and the setting temperature on the
remote controller.
2. In the Auto mode, you can not switch the fan speed. It
has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be sele
Cooling /Heatinq/Fan operation
1. Press the MODE
HEAT(cooling & heating models only) or FAN mode.
2. Press the UP/DOWN
range of 17°C~ 30°C in 1 °C increments.
3. Press the FAN
4. Press the ON/OFF
conditioner.
NOTE
In the FAN mode, the setting temperature is not displayed
in the remote controller and you are not able to control
the room temperature either. In this case, only step 1, 3
and 4 may be performed.
How to use the buttons
SLEEP
FRESH
SLEEP
FRESH
To Next Page
Loading...
Need help?
General
