To Next Page
K
Kimberly AustinSep 8, 2025
What to do if my Inverex NITROX-12KW displays AC Line V,W low voltage?
- AAmanda RodriguezSep 8, 2025
If your Inverex Inverter displays AC Line V,W low voltage, inspect the AC supply for issues causing low voltage.
What to do if my Inverex NITROX-12KW displays AC Line V,W low voltage?
If your Inverex Inverter displays AC Line V,W low voltage, inspect the AC supply for issues causing low voltage.
What should I do if my Inverex NITROX-12KW displays a DC over current error?
If your Inverex Inverter is showing a DC over current error, you should check the DC input connections and reduce the current to resolve the issue.
What to do if the DC busbar voltage is too high in my Inverex Inverter?
If the DC busbar voltage is too high in your Inverex Inverter, reduce the input voltage to the DC busbar.
What to do if the DC busbar voltage is too low in my Inverex NITROX-12KW?
If the DC busbar voltage is too low in your Inverex Inverter, increase the input voltage to the DC busbar.
What to do if my Inverex NITROX-12KW Inverter shows AC grid U over current?
If your Inverex Inverter displays an AC grid U over current, you should check the U phase for overload conditions.
What to do if my Inverex NITROX-12KW displays 'Reactor C phase over current'?
If your Inverex Inverter displays 'Reactor C phase over current', inspect the reactor C connections and reduce the current.
What to do if my Inverex Inverter displays 'Reactor A phase over current'?
If your Inverex Inverter displays 'Reactor A phase over current', inspect the reactor A connections and reduce the current.
What to do if my Inverex NITROX-12KW displays 'Reactor B phase over current'?
If your Inverex Inverter displays 'Reactor B phase over current', inspect the reactor B connections and reduce the current.
What to do if my Inverex Inverter displays AC Line W,U low voltage?
If your Inverex Inverter displays AC Line W,U low voltage, inspect the AC supply for issues causing low voltage.
What to do if my Inverex Inverter displays AC Line V,W over voltage?
If your Inverex Inverter is showing an AC Line V,W over voltage error, check and adjust the AC voltage levels.
Explains the meaning and importance of various safety symbols used in the manual.
Provides crucial safety guidelines for operating the inverter to prevent hazards.
Provides step-by-step instructions for connecting the DC input terminals securely.
Guides through the process of connecting the AC power input terminals.
Outlines the correct procedure for starting the inverter safely.
Describes the proper steps for safely shutting down the inverter.
Lists all possible error codes and their corresponding descriptions.
Provides guidance on resolving common issues and grid-related problems.
General| Rated Power | 12000W |
|---|---|
| Power Rating | 12kW |
| Max. PV Input Current | 27A |
| Battery Voltage | 48V DC |
| Output Waveform | Pure Sine Wave |
| Efficiency | 93% |
| MPPT Solar Charge Controller | Yes |
| Maximum Solar Input Voltage | 500V DC |
| Output Frequency | 50/60Hz |
| Cooling | Fan Cooling |
| Operating Temperature | -10°C to 50°C |
| PV Input Voltage | 120-450V |
| Nominal Output Voltage | 230V AC |
| AC Input Voltage Range | 170V AC - 280V AC |
| Protection Features | Overload, Short Circuit, Over Temperature |
| Humidity | 5% to 95% Non-condensing |
