What to do if my Inverex Inverter shows AC over current?
If your Inverex Inverter is showing an AC over current error, it indicates that the current in the AC system is too high. To resolve this, reduce the load on the AC system.
What should I do if my Inverex NITROX-15KW-3Ph-5G displays a DC over current error?
If your Inverex Inverter is showing a DC over current error, you should check the DC input connections and reduce the current to resolve the issue.
What to do if the DC busbar voltage is too high in my Inverex Inverter?
If the DC busbar voltage is too high in your Inverex Inverter, reduce the input voltage to the DC busbar.
What to do if the DC busbar voltage is too low in my Inverex NITROX-15KW-3Ph-5G?
If the DC busbar voltage is too low in your Inverex Inverter, increase the input voltage to the DC busbar.
What to do if my Inverex Inverter shows AC grid U over current?
If your Inverex Inverter displays an AC grid U over current, you should check the U phase for overload conditions.
What to do if my Inverex Inverter shows AC grid V over current?
If your Inverex Inverter displays an AC grid V over current, you should check the V phase for overload conditions.
What to do if my Inverex NITROX-15KW-3Ph-5G Inverter shows AC grid W over current?
If your Inverex Inverter displays an AC grid W over current, you should check the W phase for overload conditions.
What to do if my Inverex Inverter displays AC Line U,V over voltage?
If your Inverex Inverter is showing an AC Line U,V over voltage error, check and adjust the AC voltage levels.
What to do if my Inverex Inverter displays AC Line W,U over voltage?
If your Inverex Inverter is showing an AC Line W,U over voltage error, check and adjust the AC voltage levels.
What to do if my Inverex Inverter displays AC Line V,W over voltage?
If your Inverex Inverter is showing an AC Line V,W over voltage error, check and adjust the AC voltage levels.
General| Model | NITROX-15KW-3Ph-5G |
|---|---|
| Category | Inverter |
| Output Power | 15 kW |
| Maximum DC Input Voltage | 1000 V |
| Number of MPP Trackers | 2 |
| Maximum DC Input Current per MPPT | 26 A |
| Frequency | 50/60 Hz |
| Maximum Efficiency | 98.2% |
| Operating Temperature Range | -25°C to 60°C |
| Protection Degree | IP65 |
| Phase | Three Phase |
| Communication | RS485, Wi-Fi |
Explains the meaning of various safety symbols used in the manual.
Details essential safety guidelines for operating and maintaining the inverter.
Details the procedure for connecting the DC power input to the inverter.
Explains how to connect the AC power output to the grid.
Instructs on proper grounding procedures for safety and performance.
Outlines the correct sequence for starting the inverter.
Lists all error codes and their descriptions for diagnosing issues.
Provides guidance on resolving common inverter problems and errors.
To Next Page
