INVERSilence Tech B+InverSilence15 - ADVANCED SETTINGS AND WIRING; Parameter Configuration; Electrical Wiring Schematic

6
5.4 Parameter Setting
Under OFF mode, hold for 3 second to enter parameter settings.
Parameter
Description
Default Setting
Setting Range
1
Di2
100%
40%~100%, by 5% increments
2
Di3
80%
3
Di4
40%
6. WIRING CONNECTION
Warning:
All electrical wiring MUST conform with applicable National Electrical Safety Code
(NESC) and National Electric Code (NEC).
Please refer to the below schematic for information on how to correctly install your
pump.