EasyManua.ls Logo

INVISIBLE FENCE ICT 725 - User Manual

INVISIBLE FENCE ICT 725
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Made in the USA
ICT 725 Transmitter
Operation and Installation Manual
Question and Answer IconNeed help?

Do you have a question about the INVISIBLE FENCE ICT 725 and is the answer not in the manual?

Summary

Important Safeguards

ICT 725 Transmitter Installation

ICT 725 Transmitter Features and Functions

Overview of ICT 725 features, loop wire, LED indicators, BreakAlert, and adjustment knobs.

Removing the ICT 725 Cover

Instructions on how to remove the transmitter cover using hand pressure.

Installing the Signal Loop

Explains the signal loop wire's function in creating the Invisible Barrier and how breaks affect it.

Planning the Installation

Details loop wire length, twisted pair limits, and mounting transmitter location advice.

Connecting the Loop Wire

Step-by-step guide for stripping and connecting the signal loop wire ends to the transmitter.

Grounding the System

Explains the importance of grounding for lightning protection and system safety.

Connecting the Grounding Wire to the ICT 725 Circuit Board

Details how to connect the grounding wire to the transmitter's circuit board using a screw clamp.

Grounding Instructions to an Electric Outlet

Instructions for connecting the grounding wire to a standard 110v electric outlet.

Grounding Instructions to a Ground Fault Interrupter, GFI

Steps to ground the system to a GFI outlet, including cover plate modification.

ICT 725 12 v AC Transformer

Information on the recommended AC transformer, its specifications, and warnings against unauthorized use.

Setting the Signal Field

Introduces how to adjust the signal field width using coarse and fine adjustment knobs.

Setting the Signal Field Adjustments

Details using signal field adjustment knobs and the 10k-7k channel switch for optimal setup.

Checking the Signal Field

Method to verify the signal field width using the Computer Collar and its warning sound.

Installing a Battery Backup

Explains the purpose of a 12v battery backup for power outages and recommended batteries.

Installing a Battery Box

Steps for mounting a battery box on the wall and securing the battery inside.

Detecting Low Voltage in the 12 v Battery

Describes the low voltage alarm and how to manually disable it.

Computer Collar Receivers

Lists conditions for Computer Collar operation and general precautions.

Fitting the Computer Collar

Guidance on properly fitting the Computer Collar on a pet for effective contact.

Changing the Computer Collar Power Cap Battery

Detailed instructions on how to replace the battery in the Computer Collar receiver.

Power Cap Battery Tester

Introduces the Power Cap battery tester for checking battery life.

WARNING: The Power Cap

Critical safety warning regarding the handling and disposal of the Power Cap battery.

Using the Power Cap Battery Tester

Instructions on how to use the battery tester and interpret the LED indicators.

Wire Specs and Service

Wire Specifications

Provides technical specifications for the loop wire, including protected area and wire gauge.

Service Diagnostics

Table of common symptoms, causes, and troubleshooting steps for system issues.

Important Warnings

INVISIBLE FENCE ICT 725 Specifications

General IconGeneral
BrandINVISIBLE FENCE
ModelICT 725
CategoryTransmitter
LanguageEnglish

Related product manuals