Need help?Do you have a question about the INVT GD20-5R5G-4 and is the answer not in the manual?
General| Model | GD20-5R5G-4 |
|---|---|
| Power | 5.5kW |
| Output Voltage Type | AC |
| Protection Level | IP20 |
| Storage Temperature | -20°C to +60°C |
| Humidity | 5% to 95% (non-condensing) |
| Input Voltage | 380V AC |
| Output Voltage | 0-380V AC |
| Phase | 3-phase |
| Control Mode | V/F |
| Protection Features | Overcurrent, overvoltage, undervoltage, overload, short circuit, overheating |
| Operating Temperature | -10°C to +40°C |
| Altitude | Below 1000m |
Defines safety terms like Danger, Warning, Note, and Qualified Electrician and provides general safety guidelines.
Illustrates and explains warning symbols used throughout the manual for hazard identification.
Provides overall safety guidelines for operating the inverter, covering delivery, installation, and operation.
Details safety procedures for maintenance, component replacement, and product disposal.
Guides through unpacking, inspection, application confirmation, and environmental checks.
Lists technical specifications, including input/output, control modes, and peripheral interfaces.
Specifies conditions for installation site, temperature, humidity, altitude, and vibration.
Details main and control circuit wiring, terminal connections, and I/O signal configurations.
Covers short-circuit protection, cable protection, and implementing bypass connections.
Guides on identifying, resetting, and resolving various inverter faults and alarm codes.
To Next Page