GD200A series VFD Safety precautions
-4-
Keep the VFD, parts and components away from combustible materials during maintenance
and component replacement.
Do not carry out any insulation voltage-endurance test on the VFD and do not measure the
control circuit of the VFD by megameter.
Carry out a sound anti-electrostatic protection to the VFD and its internal components during
maintenance and component replacement.
1.4.4 Scrap treatment
There are heavy metals in the VFD. Deal with it as industrial waste.
When the life cycle ends, the product should enter the recycling system.
Dispose of it separately at an appropriate collection point instead of placing it in
the normal waste stream.
To Next Page
Loading...
Need help?
General