IOGear GCS1108 - Page 18

If 2 was chosen then you can go to a
specicportbyenteringtheportID.You
can also move the red highlight bar to the
specicportthatyouwanttogotoand
press [Enter].
18
F1: GOTO
Clicking the F1eldorpressing[F1] activates the GOTO function. GOTO allows you to
switch directly to a port either by keying in the port's Name, or its Port ID.
ThisfunctionistoletyouswitchtoaspecicportviaportIDorport’sname.Keying1 to
choose from Port Name and 2 to choose from Port Number in the yellow box locating in the
bottom of the pink bar.
F1: GOTO
If 1 was chosen, then type in the port’s
name that you want to go to and then press
[Enter]. You can also move the red highlight
bartothespecicportthatyouwanttogo
to and press [Enter].