To Next Page

To Previous Page

OSD Language

This function allows you to choose the

OSD language between English, Deutsch,

Japanese,SimpliedChineseandTraditional

Chinese. Simply move the red high light bar

to the language that youwish to choose and

press [Enter]. Then, press [Esc] to exit from

this function.

Screen Blanker

If there is no input from the console for the

amount of time set with this function, the

screen is blanked. Key in a value from 1–30

minutes, then press [Enter]. The default set-

ting of 0 disables this function

Hotkey Command Mode

This function allows you to enable or

disable the hotkey commands. Simply

press Y for yes and N for no. Then, press

[Esc] to exit from this function.

Hotkey

This function allows you to set the hotkey

sequence that you wish to use to trigger

hotkeys commands. Simply move the red

high light bar to choose the sequence that

you wish to use and press [Enter]. Then,

press [Esc] to exit from this function.

IOGear GCS1108 User Manual

Questions and Answers: