IOGear GCS1108 - Set Console Video Output; Mouse Emulation

Set Console Video Output
This allows you to set the console video output. If any of the computer attached to the KVM
has the VGA output.
Options are:
DVI-A to VGA – select this option
if you have one DVI monitor with
a DVI-D plus VGA connector, or if
you have two monitors (1 x DVI, 1
x VGA)
DVI-A to DVI-I – select this option if
you have a DVI monitor with a DVI-I
connector
Note: In a cascade installation
or if you are using a VGA-to-DVI
adapter in your installation, select
DVI-A to DVI-I
Mouse Emulation
Enables / disable mouse emulation function.
Note:Supportedintherstlevelofaninstallationonly.
29