37
USB Reset
If the USB loses focus and needs to be reset, do the following:
1. Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12] combination.
2. Press and release [F5].
Video DynaSync
Video DynaSync is the unique IOGEAR technology that eliminates boot-up display problems
and optimizes resolution when switching between ports. To invoke Video DynaSync, do the
following:
1. Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12] combination.
2. Press [D].
Note: If the monitor is disconnected and reconnected, the KVM re-executes Video Dy-
naSync.
Hotkey Summary Table
After invoking hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12] combination, key in one
of the keys summarized in the table below to perform the corresponding function:
To Next Page
Loading...
