IOGear GCS1716 - Page 22

22
23
Using a KVM cable connect it an available KVM port on the GCS1716. Make sure to connect 3.
the keyboard, video and mouse ports to the computer you are installing. Refer to the KVM Cable
Installation Diagrams on the following page.
Note: in order to use the peripheral USB port on the KVM you will need to use a USB KVM cable on
the GCS1716 and connect it to your computer.
Plug the power adapter cable into the power jack and into an AC power source.4.
Turn on the power to the computers.5.
1234 5 678
11121314 15 161718
PS/2-USB
CPU
CONSOLE
2
1
3
4
5
................................................
................................................