Hotkey Beeper Control
The beeper (see Activate Beeper) can be hotkey toggled on and off. To toggle the beeper, key in the
following hotkey combination:
Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12] combination.1.
Press [B]. 2.
After you press [B], the beeper toggles on or off. The command line displays Beeper On or Beeper Off
for one second; then the message disappears and you automatically exit hotkey mode.
Quick Hotkey Control
The Quick Hotkey can be toggled between [Num Lock] + [-], and [Ctrl] + [F12]. To toggle the Quick
Hotkey:
Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12] combination.1.
Press [H]. 2.
After you press [H], the command line displays HOTKEY HAS BEEN CHANGED for one second; then
the message disappears and you automatically exit Hotkey mode.
58
To Next Page
Loading...
Need help?
General
