After pressing a function key you automatically exit Hotkey mode.
Restore Default Values
This administrator only hotkey restores the GCS1716 default values. See Restore Default Values, page 83.
To restore the default values, key in the following hotkey combination:
Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12] combination.1.
Press [R].2.
Press [Enter]. 3.
After you press [Enter], the command line displays RESET TO DEFAULT SETTING for three seconds;
then the message disappears and you automatically exit Hotkey mode.
Key Description
F1 Sets the Port OS to Windows
F2 Sets the Port OS to Mac
F3 Sets the Port OS to Sun
60
To Next Page
Loading...
