Iomega Peerless - Page 11

2. Connect the FireWire cable to a FireWire port on your computer.
Look for "1394," the FireWire logo, or the Sony
®
i.Link logo, which usually identifies the FireWire
connection. If you need help finding the FireWire connection on your computer, refer to the User's
Manual for your computer or FireWire adapter card.
For the best performance, connect the Peerless FireWire cable directly to your computer. You can use
any FireWire port. See the FireWire Guidelines for important information.
Mac
®
8.6 through 9.X, Windows
®
98 second edition, Windows Me, and Windows 2000—
The drive
system can be connected or disconnected while the computer is on.
To prevent any data loss
, eject
the disk before disconnecting the interface cable or power cable from the interface module.
| top of page |
3. Connect the other end of the FireWire cable to the Peerless interface module.