Iomega Peerless - Page 2

l
Quick Start Guide
l
Solutions CD
l
Peerless Interface Module
l
Peerless Base
l
Peerless Disk
l
Power Cable
l
FireWire Cable
or
USB Cable
2. Install IomegaWare
™
software before connecting the Peerless drive system to the computer. Trust us;
you will avoid a few frustrating installation problems if you follow our advice here.
3. Set up the Iomega Peerless drive system and connect it to the computer.
4. Read the following sections for useful how-to tips for the Peerless base station and disks.