ION air lp - User Manual

USER GUIDE
Troubleshooting Bluetooth Connections with your Bluetooth Speaker
 Observe the Air LP LED status lights
1.
1. LED OFF indicates that Air LP is not actively pairing but will reconnect to a previously
known speaker at power up
2. LED blinking continuously indicates that Air LP is actively pairing to a Bluetooth speaker
3. LED solid blue indicates that Air LP is succesfully paired with a Bluetooth speaker
If you observe LED behavior that is NOT listed above, we recommend contacting ION
technical support so they can assist you.
 Move Air LP closer to your Bluetooth speaker
1.
1. Turn off both the speaker and turntable.
2. Turn them both back on then move it close to each other preferably not over 30 feet
(9.1m).
3. Attempt to pair them again while they're close to each other.
 Make sure you have no other Bluetooth speakers powered on and in range of Air LP
Air LP attempts to pair with the strongest and closest Bluetooth device available. To ensure that
Air LP pairs with your desired Bluetooth speaker, make sure all other nearby Bluetooth devices
are turned off.
 Check that you are using a Bluetooth speaker and not another type of wireless speaker
There are different methods of streaming audio wirelessly. It is important to make sure that the
speaker you are attempting to pair with Air LP is Bluetooth compatible. Some systems such as
Apple TV and SONOS® use non-Bluetooth technology to stream audio. These products will not
pair with Air LP.
 Give Air LP enough time to pair to your speaker
Distance, wireless interference, and signal strength can all affect how long it takes Air LP to pair
with your speaker. Occasionally, it may take a few minutes for the pairing process to complete,

Summary

Troubleshooting Bluetooth Connections

Air LP LED Status Lights

Explains LED indicators for pairing and connection status.

Optimize Bluetooth Pairing Environment

Tips on proximity, device management, and compatibility for pairing.

Resolve Bluetooth Pairing Issues

Steps like power cycling and checking speaker instructions.

ION USB Turntable Setup and Usage

Connect to Windows PC for Audio

Guides users on connecting the turntable to a Windows PC for audio.

Connect to Macintosh for Audio

Guides users on connecting the turntable to a Mac for audio.

Pair Air LP to Bluetooth Speaker

Detailed instructions for successfully pairing the Air LP to a Bluetooth speaker.

Turntable Operation and Issues

Addresses common turntable problems like non-spinning records and skipping.

Connect Air LP to Computer via USB

Explains connecting Air LP to a computer via USB and software.

ION air lp Specifications

General

Speeds	33 1/3, 45, 78 RPM
Bluetooth	Yes
Built-in Speakers	Yes
USB Port	Yes
RCA Output	Yes
Headphone Output	Yes
Platter	Aluminum
Motor	DC motor
Pitch Control	No
Type	Belt Drive Turntable
Tonearm	Straight
Cartridge	Ceramic
Weight	7.7 lbs