ION Audio Pro Glow™ Express User Guide 11
Linking Two Speakers
If you would like to play music from a Bluetooth device, you can first “link” two Pro Glow™
Express speakers together in order to listen to your music in stereo. One Pro Glow™ Express
will serve as the left speaker and the other will serve as the right speaker.
T
o link two Pro Glow™ Express speakers together:
1. Press and hold the S
tereo-Link
TM
/ Repeat button on both speakers to enter Stereo-Link™
mode. You will hear a tone, and the word L
INK will flash on each speaker’s Display while
they search for each other. Once a link has been established, the word L
INK will remain on
the D
isplay.
Note: The linking process can take up to a minute to complete. The closer the two speakers
are to each other, the quicker the link is established.
2. Once the two speakers are linked, press and release the S
ource button on either speaker
to select Bluetooth mode and begin the Bluetooth pairing process. The speaker you use
for Bluetooth pairing will serve as the primary speaker. On its D
isplay screen, the Bluetooth
icon will flash to indicate that Bluetooth pairing is in process.
3. Navigate to your Bluetooth device’s setup screen, find Pro Glow™ Express and connect.
When your Bluetooth device is connected, the Bluetooth icon will be lit solid on the primary
speaker’s D
isplay, and you will be able to play audio from the Bluetooth device through
your two linked speakers.
T
o disconnect two speakers or cancel linking between the two, double press the Stereo-
Link
TM
/ Repeat button on either speaker.
Note: Pro Glow™ Express is not wireless link compatible with previous ION Audio Pro Glow™
models.
1 - PRESS & HOLD
(speaker 1)
2 - PRESS & HOLD
(speaker 2)
To Next Page
Loading...
Need help?
General
