ION Total PA Max User Manual

4
Quick Setup
Connection Diagram
Speaker Stand Installation
1. Fully extend the speaker stand tripod legs on a flat, stable
surface. Look in the box contents under the foam sheet for the
rubber feet and speaker stand mounting knob.
2. Raise the mounting pole up to the appropriate height needed
and tighten the side adjustment knob.
3. Insert the pin into the bottom pin-hole so the mounting pole
stays at your set height.
4. On Total PA Max, adjust the bottom knob counter-clockwise
so the screw is not blocking the opening.
5. Line up the Total PA Max mounting hole with the speaker stand
pole and place on the pole.
6. Tighten the mounting knob clockwise on Total PA Max.
3 45/6
Items not listed under
Introduction > Box Contents
are sold separately.
2
1
Tablet
Microphones
SD Card
USB drive
Smartphone
Power

ION Total PA Max Specifications

General

Bluetooth	Yes
USB Input	Yes
SD Card Input	Yes
FM Radio	Yes
Battery Life	Up to 50 hours
Wheels	Yes
Handle	Yes
Auxiliary Input	3.5mm
Microphone Included	Yes
Woofer Size	15 inches
Tweeter Size	1 inch