IOTAVX PA 3 - Specification

PA 3 Owner Manual 9
Specification*
ITEM SPECIFICATIONS
Amplifier:
Continuous Power Output (Stereo) 45 Watts x 2CH (20Hz - 20kHz, <0.07%, 8)
90 Watts x 2CH (20Hz - 20kHz, <0.07%, 4)
Continuous Power Output
（
Mono/
Bridged
)
100 Watts x 1CH (20Hz - 20kHz, <0.07%, 8)
180 Watts x 1CH (20Hz - 20kHz, <0.07%, 4)
Total Harmonic Distortion < 0.02% @ 1kHz
Frequency Response 20Hz - 100kHz
Input Sensitivity - Line Inputs 200mV
Input Overload - Line Inputs 4V
Signal to Noise Ratio (IHF “A”Weighted) > 100dB
Channel Separation - Line Inputs > 80dB
General:
Standby Power Consumption < 0.5W
Power Requirements - AC AC230V / 50Hz, AC115V / 60Hz SELECTABLE
Power Consumption 220W Maximum
Dimensions - Main Unit 432mm x 240mm x 59mm (W x D x H)
Weight - Main Unit 6.5Kg
*Design and specications are subject to change without notice.
This symbol marked on the product and instruction manual means that your electrical and electronic
equipment should always be disposed of at the end of its life separately from your general household waste.
EN